Sistemas Operativos
Enviado por martel360 • 25 de Octubre de 2014 • 806 Palabras (4 Páginas) • 246 Visitas
Step 2: Install Dynamips and GNS3
Before you install GNS3 you must be sure that Dynamips is installed first.
The following command ensures you get the latest of both and will also
install Wireshark.
sudo apt-get install gns3 dynamips
Step 3: Install VPCS
As with the other packages, VPCS is also part of the PPA and is installed in the same
way as shown:
sudo apt-get install vpcs
Step 4: Install Xterm
GNS3 requires Xterm to run VPCS and the Tools | Terminal command. Xterm is
often installed by default on Linux, so the following command will update your
install to the current version if it is already installed, or install it if it is not.
sudo apt-get install xterm
You are now ready to proceed to the post-installation tasks.
Step 2: Install Dynamips and GNS3
Before you install GNS3 you must be sure that Dynamips is installed first.
The following command ensures you get the latest of both and will also
install Wireshark.
sudo apt-get install gns3 dynamips
Step 3: Install VPCS
As with the other packages, VPCS is also part of the PPA and is installed in the same
way as shown:
sudo apt-get install vpcs
Step 4: Install Xterm
GNS3 requires Xterm to run VPCS and the Tools | Terminal command. Xterm is
often installed by default on Linux, so the following command will update your
install to the current version if it is already installed, or install it if it is not.
sudo apt-get install xterm
You are now ready to proceed to the post-installation tasks.
Step 2: Install Dynamips and GNS3
Before you install GNS3 you must be sure that Dynamips is installed first.
The following command ensures you get the latest of both and will also
install Wireshark.
sudo apt-get install gns3 dynamips
Step 3: Install VPCS
As with the other packages, VPCS is also part of the PPA and is installed in the same
way as shown:
sudo apt-get install vpcs
Step 4: Install Xterm
GNS3 requires Xterm to run VPCS and the Tools | Terminal command. Xterm is
often installed by default on Linux, so the following command will update your
install to the current version if it is already installed, or install it if it is not.
sudo apt-get install xterm
You are now ready to proceed to the post-installation tasks.
Step 2: Install Dynamips and GNS3
Before you install GNS3 you must be sure that Dynamips is installed first.
The following command ensures you get the latest of both and will also
install Wireshark.
sudo apt-get install gns3 dynamips
Step 3: Install VPCS
As with the other packages, VPCS is also part of the PPA and is installed in the same
way as shown:
...