Video001 Wireless Camera Receiver
Enviado por elnerd8 • 1 de Diciembre de 2013 • Exámen • 2.555 Palabras (11 Páginas) • 3.696 Visitas
Video001 Wireless Camera Receiver
Video002 USB 2.0 DVR
Quick Installation Guide
Installation Overview
Packing content:
A,Video001 Wireless Camera Receiver:
1*Video001 Wireless Camera Receiver
1* Power Adapter
1*USB Cable
1* Installations CD-ROM with:
.Driver for Video001 Wireless Camera Receiver
.Application
B, Video002 USB 2.0 DVR
1*Video002 USB 2.0 DVR
1*installations CD-ROM with:
.Driver for Video002 USB 2.0 DVR
.Application
Connecting the Video001 Wireless Camera Receiver when you use it by
TV,Monitor ,or LCD Monitor:
You must connect the Power Adapter to Wireless Camera Receiver when you use it by
TV,Monitor or LCD Monitor.
(But no need this when you connect it to computer ).And you can use Remote Controller
to set any function (You can find the instruction for using remote controller in the
bottom of this guide ).
Driver-Installation
ote : "If you have any anti-virus
software enabled,please disable
it during the installation of
the software."
When you first connect the Video001 Wireless
Camera Receiver (or Video002 USB 2.0DVR) to
your computer a Hardware Assistant will
appear,the "USB 2.0 Video Capture Controller "
will be recognized.\
N
2
Insert the "Installations CD-ROM" into your CD drive.
Select the option "Install Driver" and click "Next".
If prompted " Can Windows connect to Windows Update to search for software?'' select
"No,not this time" and select "Next".
Select the option "Install the software automatically" and click "Next".
A window may appear about the "SMI Grabber Device" not passing the windows logo
testing,select "Continue Anyway"
When "completing the Found New Hardware wizard" window appears click the "Finish"
button to complete the driver installation.
Ote: "If any further compenents are found please repeat the above process
until you receive the message "Found new hardware:Your hardware is
installed and configured use"
You will now need to check that The drivers are installed correctly.
Right Click on My Computer and Left Click on Properties.Click on Hardware tab and
then Device Manager.
In the "Device Manager",click on the
"+symbol" on the "Sound Video and
Game controllers" section .If the driver
is installed correctly you should see the
" SMI Grabber Device ". If it has a
Yellow mark next to it then this means
that the driver is not installed correctly.
You will need to remove the driver and
disconnect the Video001 Wireless
Camera Receiver (or Video002 USB 2.0
DVR) from the computer and
re-connect is to install the driver again.
Software Installation
To start the Application Installation click
Start/Run then type your CD-ROM and
click "Install".
Select your language for the installation
and click "next" or/ and "install".
Click "finish" to complete setup, restart
your computer if needed.
N
3
Run MultiViewer which you just installed.
Instruction of remote controller (Video001)
Note:The remote controller only work for control the hardware device,not for the
application of this device.Please not do use channel auto-view function with both
application and remote control at the same time.
Key functions
Power on /off :only works for when using power adaptor.
CH1-CH4: to select the 1-4 channel on.
Auto:stop/start channel auto-view ,automatically select CH1-CH2-CH3-CH4,then CH1...
The default speed is 1 time/second (you
can also change the speed with using
"CH1-CH4", for example,when you
click "CH1" then click "Auto" the
speed will be 1 time/second and so on ....
Set:IF you do not want to any channels(s)
...