Mi Archivo

Click No if you want the print server to keep using the default IP address and keep the default

Infrastructure settings:

z Infrastructure mode

z SSID: <ANY>

z Encryption: none

z DHCP client: Off

z IP address: 192.168.0.10

z Subnet Mask: 255.255.255.0

Click Yes if you want change wireless settings or assign a static IP address to the print

server:

z On the Basic Wireless Settings screen, select Communication Type according to

your network:

- Infrastructure

- Ad-Hoc

z Enter the proper SSID of your wireless network.

- Channel: optional

- Data Transmit Rates: select Auto or others

- Transmit Mode: select Auto or others

13 z On the Wireless Security screen, enable or disable WEP/WPA encryption, configure

according to your wireless network and click Next.

z On the TCP/IP Settings screen, specify a fixed or dynamic IP address for the print

server, a fixed IP address is highly recommended. Click Next.

Note:

The IP address of print server must be within the same subnet as your network adapter.

7. In the setup wizard, select an already configured printer from the list, click Next, Next

and then Finish to complete the installation.

or

Select Add New Printer if the print server is connected to a printer that hasn’t been

installed before and does not appear in the list.

8. Click Add New Printer to launch Windows Add Printer Wizard.

149. Click Next and select Local Printer, make sure the Automatically detect and install

my Plug and Play printer check box is NOT checked. Then click Next.

10. Make sure the Use the following port radio-button is clicked and select LPT1:

(Recommended Printer Port) from the pull-down list. Then click Next.

...