Soldadura En Inventor
Enviado por Santy27 • 23 de Septiembre de 2013 • 796 Palabras (4 Páginas) • 320 Visitas
Inventor 2011 Weldments
Page 1 of 18
Inventor 2011
Weldments
Elise Moss
1.
Go to Manage→Projects.
2.
Set the tutorial_files as your active project.
3. Browse to the Weldments folder.
Open Welding.iam.
4.
On the Assembly ribbon:
Select Convert to Weldment.
5. Select Yes.
Inventor 2011 Weldments
Page 2 of 18
6. Set the Standard to ANSI.
Set the Weld Bead Material to Welded Steel Mild.
Press OK.
7.
The feature browser updates to show three types of
operations:
Preparations, Welds, and Machining.
8.
Highlight Welds.
Right click and select Edit.
You can create three types of weld features: fillet, groove, and
cosmetic welds.
Cosmetic weld features, the preferred type, are represented by
graphical elements. You can represent a wide variety of weld
beads as cosmetic welds, including fillet welds and various
groove welds.
Weld preparations are not required for cosmetic welds. The weld
symbol contains the weld preparation required for the selected
edges.
9. On the ribbon:
Select Weld→ Cosmetic .
Inventor 2011 Weldments
Page 3 of 18
10.
Enable Chain.
Select the lower edge of the brace.
11.
Enable Create Welding Symbol.
12.
Click inside the lower weld symbol box.
Select the symbol for Bevel Weld.
13. Fill in the symbols.
Set the depth to 6 mm.
Type G for Grind.
Set to Flat.
Press OK.
14.
An annotation is attached to the edge.
Inventor 2011 Weldments
Page 4 of 18
15. Right click on the Beads folder in the
browser.
Select Finish Edit.
Inventor 2011 Weldments
Page 5 of 18
16.
Change the view using the view cube.
17. On the ribbon:
Select Weld→ Fillet .
18.
You need to make two selections of the two faces/edges to be welded
together.
19.
Select the side face of the brace.
Click on the 2 button.
Select the cylindrical face of the button.
20.
Set the size to 6 mm x 6.
Inventor 2011 Weldments
Page 6 of 18
21.
Enable Create Welding Symbol.
22. Fill in the values for the symbol.
Press OK.
23.
The weld is applied.
24.
Right click on the Welds category in the browser.
Uncheck Symbol Visibility to turn off the weld
annotations.
25. Right click on the Beads folder in the
browser.
Select Finish Edit.
Inventor 2011 Weldments
Page 7 of 18
26. On the ribbon:
Go to Process→Machining.
27. On the ribbon:
Select Hole from the Preparation and
Machining panel.
28. Set the Placement to Concentric.
Select the top face of the boss.
Select the edge of the boss for the
Concentric Reference.
Set the diameter to 30 mm.
Set the Termination to Through All.
Press OK.
29. Note that the Hole appears under Machining.
30.
On the ribbon:
Select 2D Sketch from the Sketch panel.
Inventor 2011 Weldments
Page 8 of 18
31.
Select the top face of the boss.
32. Select the top edge of the boss and
use Project Geometry to copy the
edge into the sketch.
...