Tarjeta Madre Biostar

A780L3B Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction 1

1.1 Before You Start 1

1.2 Package Checklist 1

1.3 Motherboard Features 2

1.4 Rear Panel Connectors 3

1.5 Motherboard Layout 4

Chapter 2: Hardware Installation 5

2.1 Installing Central Processing Unit (CPU) 5

2.2 FAN Headers 7

2.3 Installing System Memory 8

2.4 Connectors and Slots 10

Chapter 3: Headers & Jumpers Setup 13

3.1 How to Setup Jumpers 13

3.2 Detail Settings 13

Chapter 4: RAID Functions 17

4.1 Operating System 17

4.2 Raid Arrays 17

4.3 How RAID Works 17

Chapter 5: Useful Help 20

5.1 Driver Installation Note 20

5.2 Software 21

5.3 Extra Information 25

5.4 Troubleshooting 27

Appendix: SPEC In Other Languages 28

German 28

French 30

Italian 32

Spanish 34

Portuguese 36

Polish 38

Russian 40

Arabic 42

Japanese 44

A780L3B

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

„ Prepare a dry and stable working environment with sufficient lighting.

„ Always disconnect the computer from power outlet before operation.

„ Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

„ Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

„ Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

„ Keep the computer from dangerous area, such as heat source, humid air and water.

1.2 PACKAGE CHECKLIST

Serial ATA Cable X 2

Rear I/O Panel for ATX Case X 1 Installation Guide X 1

Fully Setup Driver CD X 1 (full version manual files inside) USB 2.0 Cable X1 (optional)

Serial ATA Power Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

1

Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

Socket AM3 AMD 64 Architecture enables 32 and 64 bit

CPU AMD Sempron / Phenom II / Athlon II computing

processors (Maximum Watt: 95W) Supports Hyper Transport 2.0

FSB Support Hyper Transport 3.0

Supports up to 3.2 GT/s Bandwidth

Chipset AMD 760G

AMD SB710

...