Diccionario (106 palabras tecnicas de troqueles)

1367222 - DISEÑO DE TROQUELES

DICTIONARY

Allen wrench: it is a type of tool used to screw the inner screws, measured in millimeters, which differs from the whitworth measures in inches. Compared to a philips screw, it resists a greater torque.

Automatic stop: the automatic thiopes locate the strip automatically while it is fed through the matrix, the operator has only to push the strip against the end of the automatic stop and this is retained while the piece and the metal cuttings are pulled from it, then the stop is released automatically and the strip moves to the next station where it is again stopped for the next operation.

Awl: 1.sharp point tool, for opening holes, eyelets and other holes. 2. Pointed steel tool used to engrave metals.

Awl: it is a steel tool of high hardness, of cylindrical or prismatic shape, with an end or mouth with a sharp point or one that when pressed or struck on a surface is printed in a die. You can have several tip types depending on their use.

Band guides: the band guides consist of two prismatic rules, whose thickness is slightly higher than that of the strip to be ground. These rules are interlocked parallel to each other for the purpose of longitudinally and transversally guiding the strip of sheet metal in its displacement inside the matrix.

Bend: apply one over the other two parts of a flexible thing

Bent: the doubling matrices perform simple doubling in piers obtained by the stamping process, the bending is simple when the bending line is straight, one or more bends can be made, one or more doubling the bending dies are widely used.

Bolt (screw): it is a device that is used to hold an object.

Brass: copper and zinc alloy yellow, ductile and malleable, which when polished easily shines; it is used in the manufacture of containers and metal structures.

Burin: instrument used mainly by engravers to engrave metals or stone consisting of a thin and pointed prismatic steel bar.

Bushings: the bushings for the systems are manufactured to the highest quality standards and supervised in their manufacture, the bushings for packed system are manufactured in hardened and rectified steel with treatments and hardness levels resistant to friction and wear. Available in standardized diameters and various sizes, for plate mounting.

Cad: (computer aided design) refers to software that is used to design and design documentation.

 Cad-cam computer aided design (cad) and computer aided manufacturing (cam), which can be used separately or in conjunction with each other.

Caps: these are pieces of cylindrical shape that are fixed to the plate with an adjustment with soft tightening and with flanges

Chamfer: face of a solid (block of stone, wood, etc.) That results from cutting a corner by a plane.

Computerized numeric control: automation system of machine tools that are operated by commands programmed in a storage medium

Conformed: the forming dies produce more complicated shapes in the work pieces. The bending lines are curved in place of straight lines and the metal is subject to plastic deformation.

Corrosion: is the loss or deterioration of the physical and / or chemical properties of a metal

 Creased: formed from an edge bending the metal on itself.

Crown: gear, element of the differential that receives the movement of the attack pinion and transmits it to the satellite box.

Cut: divide a thing or separate its parts with a cutting instrument.

Cutting matrix: types of matrices. The matrices are the tools that allow the raw material to be transformed by means of various mechanical actions. ... This tool is known as a die. It is mainly used to cut, bend or mark soft materials

Cylinders: the service of magnetic cylinders for any machine. Made of high quality steel with hardened tracks and strong magnets for maximum fixation. All cylinders provide a high precision gear.

Diameter: a straight line joining two points of a circumference, of a closed curve or of the surface of a sphere passing through its center. "the radius of a circle is half the diameter"

Die gears: a gear is a mechanism for transmit power from one component to another by means of a circular movement in a mechanism or machine that requires said application. A gear is not more than a cogwheel, classified generally by size; where generally the larger one is flame meshing and the smaller one opinion.

Die: a die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press. Like molds, dies are generally customized to the item they are used to create. Products made with dies range from simple paper clips to complex pieces used in advanced technology./ vertical press with the slide operated by means of connecting rods working with traction attached to the engine mechanism below the press bench.

Dimensions: the dimensions are the indicators of the measurements that an element has in a plane, be it long, wide or high; vertical, horizontal, diagonal or heights. They consist of a number that indicates the number of centimeters or meters and a line that marks the limits, from where to where it is marked is measuring.

Dolly: metal piece that is used to hold the head of a rivet or rivet while adjusting the closing head.

Dowel: piece of metal that serves to join and guide two pieces or plates.

Drill: a drill or drill is called the machine or tool with which most holes that are made to the parts in the mechanical workshops are machined. These machines stand out for the simplicity of their handling. They have two movements: the rotation of the bit that prints the electric motor of the machine through a transmission by pulleys and gears, and the advance of penetration of the drill, which can be done manually sensitive or automatically, if it incorporates transmission to do it.

Drill: machine or tool with which the majority of the holes that are made to the parts in the mechanical workshops are machined.

Drilling a die: the right drilling system for each application. From the small manual drill, through the electric table drill to the fully automated punching and punching machines for large volumes of work. Extensive range of replaceable drilling tools for semi-professional and professional lines that allow drilling of all kinds.

Ductility: is the ability of a material to deform before fracturing

...