Serial Task Bar Hide 1.8

Jellybean Paladin donwload: http://www.4shared.com/rar/-g4MRpEG/...n-Paladin.html

mirror: https://www.dropbox.com/s/vi8lwazgc5...an-Paladin.rar

it has the flash tool added into the rar.

Upgrade Steps:

Step 1

a. unpack firmware files and flash tool

b. do not start the flash too yet

c. connect the USB cable to PC only, (DONT NOT CONNECT TO DEVICE YET)

Step 2

a. boot device to desktop

b. press and hold the Volume -

c. connect the mini USB to device and directly after poke the reset hole button

d. Windows will now ask for USB boot drivers

e. browse to 4770 drivers located under flash tool folder and install the drivers (see image)

f. unplug the USB cable from device

Windows drivers

Step 3

a. start the flash tool (USBbootTool.exe)

b. select all appropriate files as shown in image below

Flash tool

Step 4

a. press and hold the Volume -

b. connect the mini USB to device and directly after press the reset button

c. when you see the first process bar loading, release the Volume - button

d. WAIT, when flash process is done the the device will automatically restart

e. you can unplug the USB cable and exit the flash tool

THANK TO ANDROPOS!!!!

1 - apagar el tablet

2 - pulse el vol abajo + enchufe el usb + reset (esto hará que se instala el controlador.) 3 - apague la tabla 4 - abrir el usb flash suave 5 - Seleccionar el 3 roms 6 - prensa el vol abajo + enchufe el usb + reinicio 7 - se iniciará auto parpadear la tableta.

howdy i own 2 paladin tablets and i managed to root them

how did i do it

firs download z4root

z4root_hnczp-ics.apk - Downloads - Android Tablets Forum

its chinesebut you need to install the apk run it and push the bottom button 2nd one

let it do its thing after a few minutes it will auto reboot

then go to market and get superuser install it and whola its rooted

worked on both the tablets i got

Thank you Andropos for the instructions. I have a few notes that might clarify some questions.

When you unrar the package, the program you want to run (USBbootTool.exe) will be in the folder "升级工具".

If you get an error when you first run the program then go to your control panel, click "Clock, Language, and Region" then "Region and Language". From the new window that pops up, click the "Administrative" tab. Click the button that says "Change system locale..." and select "Chinese (Simplified, PRC)". This will correct some sort of Unicode error and will allow the program to run smoothly (For those running Windows 7).

Step 1: Once you have the program running, you will need to select "Jz4770" under where it says "CPU型号:" in the upper right hand corner, if it is not already selected.

Step 2: The program will ask for seven files. Don't let this confuse you, as all you need are four. The four necessary files are located in the "NOVO7骑士固件" folder. To load the files click the "打开..." buttons to the right of the drop down menus.

The first three files (mbr-xboot.bin, boot.img, and system.img) all match the requested file names next to the check boxes, however the last one (vfat.bin) is actually "novo7骑士（8G）.IMA".

Finally, Make sure the boxes are checked when you flash.

Oh, lo tengo ahora. Tuve que desmarcar la segunda cosita bajo Tarjeta SD / MMC , entonces funcionó.

...